Hard & Shine Acrylic Waterproofing is a high-performance penetrative waterproofing solution based on advanced acrylic polymers. Designed to soak deep into cementitious surfaces, it creates an internal waterproof layer that seals hairline cracks, repels moisture, and enhances the durability of plaster, concrete, and masonry.
Unlike surface-level coatings, this solution penetrates the pores of the substrate to form a water-repellent barrier from within, making it ideal for both old and new constructions where deep action is critical.
Soaks into the substrate and chemically bonds with the surface, offering long-term internal waterproofing instead of forming a mere surface film.
Provides UV-stable protection from rain, heat, and humidity — suitable for exposed walls and roof treatments.
Effectively seals cracks up to 0.5 mm and prevents further water ingress, ensuring leak-free performance.
Allows trapped moisture inside walls to evaporate without blistering or peeling, preserving the integrity of the structure.
Can be applied by brush, roller, or spray directly over plaster, concrete, brick, or stone without need for priming.
Rubberkrete is an advanced silicon-modified waterproofing powder designed to be mixed directly with cement to create a flexible, breathable, and long-lasting waterproof coating. It forms a rubberized film within the concrete or plaster matrix, effectively sealing pores and hairline cracks while allowing the structure to breathe making it the perfect solution for both positive and negative side waterproofing.
Specially engineered with silicon polymers that enhance hydrophobicity and form a water-repellent barrier deep inside the cementitious matrix.
Forms a rubberized, flexible layer that bridges micro-cracks and tolerates minor substrate movements—ideal for terraces, bathrooms, and slabs.
Easily mixes with cement, no need for synthetic latex or separate liquids. Apply using brush, roller, or trowel on horizontal or vertical surfaces.
Can be applied on both positive and negative pressure sides (like internal wet walls or exterior basements)
One pack covers a large surface area when blended properly with cement. Saves cost compared to traditional bitumen or membrane solutions.
Mix Ratio: 1 part Rubberkrete + 2 parts Cement + water to required consistency
Method: Apply in 2 coats with a brush or roller
Surface Preparation: Clean surface, remove dust/oil, and dampen before applying
Coverage: Approx. 25–35 sqft/kg in two coats (may vary by surface condition)
We make product solutions for a sustainable tomorrow. We develop affordable Solutions to address construction needs with emphasis on environmental Protection. We combine latest technologies across the world helping our Customers in India to meet the needs of today and tomorrow.
©Copyright 2024 Hard And Shine Chemicals Private Limited – All Rights Reserved.